Arduino UNO Wifi ESP8266-01 CH340G Price in Pakistan
The Arduino UNO Wifi ESP8266-01 CH340G. The Arduino Uno Wi-Fi is the same as a Arduino Uno Rev3 but with an integrated Wi-Fi module! The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
The ESP8266 Wi-Fi Module is a self contained SoC with integrated TCP/IP protocol stack that can give access to your Wi-Fi network. (Or the device can act as an access point.)
It is a modernized version of the classic Arduino UNO R3 board. Full integration of a microcontroller ATmega328 and a Wi-Fi chip ESP8266 with 32 MB memory on one board. All modules can work together or individually. Each of the microcontrollers has led for connecting peripheral sensors and modules. A convenient solution for developing new projects that require Wi-Fi.
Through USB, you can update sketches and firmware for both ATmega328 and ESP8266. For this on board, there is a UART converter CH340G. The board has a DIP switch, which switches the modes of interaction of microcontrollers ATmegaa328 and esp8266.
The datasheet of Arduino UNO WIFI is available here.
Specifications:
- Arduino (Atmel ATMega328P MCU)
- ESP8266 built-in module
- Arduino part
- MCU – Atmel ATmega328 8-bit AVR MCU @ 16 MHz with 32 KB flash Memory, 2KB SRAM, 1KB EEPROM
- Digital I/O pins – 14, with 6 PWM and UART
- Analog Input Pins – 6
- DC Current per I/0 – 40 mA
- Misc – Reset button
- Operating Voltage – 5 V
- ESP8266 part
- SoC – Expressif ESP8266EX Tensilica Xtensa LX106 processor @ 80 MHz
- Storage – 4MB SPI flash
- Connectivity – 802.11 b/g/n WiFi @ 2.4 GHz, wake up time < 2 ms; Antenna: PCB and IPX
- Misc – Bootloader button, WiFi LED
- Operating Voltage – 3.3 V
- Common specs
- USB – 1x USB device port
- Input Voltage – 5-12 V via DC jack, Vin or USB port (5V only)
- Power Consumption – 130 mA (sleepmode 80 mA)
- Dimensions – 68.5 x 53 mm
- Weight – 28 grams
More info & typical usage
Arduino Uno Wi-Fi board will come pre-uploaded with the RestServer sketch that allows you to control the board via your web browser using the URL: http://192.168.240.1/arduino/<digital|analog>/<GPIO>/<ON_OFF|<INPUT_MODE>, where digital or analog let you select the IO type, GPIO the pin number, ON_OFF is either 1 or 0 for on or off, and INPUT_MODE is either input or output. Some examples:
- /arduino/digital/13/1 – Sets GPIO 13 to high
- /arduino/digital/13 – Reads the value on GPIO 13
- /arduino/analog/2 – Reads Analog pin 2 value
- /arduino/mode/13/input – Set GPIO 13 to input
Packages Include:
1 × Arduino Uno WIFI Board with ESP8266
Best Online Shopping website for electronic Components & WIFI wireless module Transceiver Board in cheap price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta, Faisalabad, and all over Pakistan By Pakluck. For more info. Contact or WhatsApp
Reviews
There are no reviews yet.