ESP8266-01S Serial to wifi module
₨ 300 Original price was: ₨ 300.₨ 280Current price is: ₨ 280.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
| Weight | 0.15 kg |
|---|
47 in stock
CompareESP8266-01S Serial to wifi module Price in Pakistan
The ESP8266-01S Serial to wifi module WiFi Module is a self-contained SOC and an upgraded version of ESP01. ESP8266 serial module has an integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01s connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.
Features And Specifications Of ESP8266 ESP01S (updated) Wireless Remote Serial WiFi Module:
- Wireless standard: 802.11 b / g / n
- Frequency range: 2.4 GHz ~ 2.5 GHz (2400 m ~ 2483.5 m)
- Data interface: UART / HSPI / I2C / I2S / IR Remote Contorl / GPIO / PWM
- Operating voltage: 3.0-3.6 V (suggest 3.3 V)
- Operating current: average of 300 ma
- External interface: N / A
- Wireless network mode: station / softAP / SoftAP + station
- Security mechanisms: WPA / WPA2
- 1MB (8Mbit) Flash size.
- Up to 160MHz clock speed
- Very simple AT commands, easy to use.
- Low-power consumption and small
- Internal LWIP interface.
- This module just have small up-gradation on the ESP-01 PCB board
Note:
- This module requires a 3.3 volt supply for VCC and 3.3V logic.
- It is not 5V tolerant. Connect RX or TX on 5V Arduino will destroy this module.
- You must use a logic level converter or a 3.3V Arduino.
- The 3.3V supply on the Arduino Uno has the inadequate current capability to power this module.
- You must provide a separate, higher 3.3V supply(about 300mA or better).
D185 ESP8266 ESP-01 DataSheet remote serial Port WIFI wireless module through walls Wang
ESP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Solutions:
Warnings:
Package Include:
- 1x ESP8266 ESP01S WIFI Module
Best Online Shopping website for AI-Thinker ESP8266 ESP-01S Upgraded version serial WIFI wireless module Transceiver Board in cheap price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta, Faisalabad, and all over Pakistan By Pakluck.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino Due Board
Arduino Leonardo with Cable
Arduino UNO Cable
- Product: Arduino UNO USB Cable
- The cable length is approximately 0.6 m. Cable color and shape may vary slightly from the image as our stock rotates.
- If you want to have a closer look at USB cables and standards check the cable pinouts referralon pinouts
- USB cable type A/B Standard USB 2.0 cable.
- USB Cable
Arduino UNO R3 Case
- Weight: 53g
- Dimensions: 79.5 x 64.5 x 21mm
- Material: Plastic
- With screw copper pillar and installation instructions.
- his case provides easy access to all ports
- It requires no tools for easy assembly and disassembly
- Simply Clicks Together Enclosure
- This case is a beautiful yet simple way to show off your UNO!
ESP8266-01 USB Adapter Programmer Board
- It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
- It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
- This module supports all Windows systems.
- The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
- It consists of a CH340 chip.
- It has high-speed CPU frequency.
- It can be used as a serial port WIFI.

Reviews
There are no reviews yet.