Propeller Fan for Small DaC Motor (Low quality)
Pulley Gear for Small DC Motor
Raspberry Pi 2 Model B
Raspberry Pi 3 Model B
Raspberry Pi 4 Model B 1GB Ram
Raspberry pi Heatsink Kit
This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heat sink, it has been attached with thermal conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi.
Compatible with Raspberry Pi B.
Comes with 3 plates, of which 2 small and 1 large.
Raspberry Pi Model B
RFID Card 125kHz
RFID RC522 Reader with Tags
- Current :13-26mA / DC 3.3V
- Idle Current :10-13mA / DC 3.3V
- Sleep current: <80uA
- Peak current: <30mA
- Operating Frequency: 13.56MHz
- Supported card types: S50, S70, UltraLight, Pro, Desfire
- Product Physical Characteristics: Dimensions: 40mm × 60mm
- Environmental Operating temperature: -20-80 degrees Celsius
- Environment Storage temperature: -40-85 degrees Celsius
- Relative Humidity: 5% -95%
- Data Transfer Rate: Max. 10Mbit / s
RJ45 Jack Male
Robot Chassis 4 Wheel DC Motors
Robot Wheels yellow
RS485 USB Converter Adapter (FTDI)
Servo MG946R
- Brand new and high quality.
- High speed, stable and shock proof.
- Stall Torque: 10.5 kg / cm (4.8V), 13.0 kg / cm (6.0V).
- Operating Speed: 0.20 sec/60¡ã (4.8V), 0.17 sec / 60¡ã (6.0V)
- Operating voltage: 4.8 – 7.2V.
- Dead band width: 10usec.
- Power Supply: through external adapter.
- Connector wire length: 30cm.
Servo MG995R
- orque: 12kg/cm(6V), extreme high force.
- Common GND, VCC, Data connector for most general use.
- volt supply,
- 180 degree movement
- See more specs in attached pictures
- Rapid moving speed, 0.2 sec for 60 degree
- Accessories are for “-” type
- Reaction speed: 0.17sec/60 degrees (4.8v no load) 0.14sec/60 degrees (6v no load)
- Operating voltage: 4.8-7.2V for MG996, 3-7.2V for MG995
- Working temperature: 0°C-55°C
- Gear form: metal gear
- 100mA current consumption
- Working Deadzone: 5us (microseconds)
Servo MG996R
it is Stable and Shock Proof
this is Coreless Motor
it has Metal Gears
it has Double Ball Bearing
its Connector Wire Length 300mm (12″)
its dimensions are 40mm x 19mm x 43mm (approx 1.5″ x 3/4″ x 1.5″)
its weight is just 55g (just over 2 oz)
Operating Speed is just 0.17sec / 60 degrees (4.8V no load)
Servo SG90 9G
Product Description
Modulation: Analog
Torque: 4.8V : 1.8 Kg-cm 6V : 2.2Kg-cm
Speed:
4.8V: 0.10 sec/60°
Dimensions:
Length: 0.91 in (23.1 mm)
Width : 0.48 in (12.2 mm)
Height : 1.14 in (29.0 mm)
Motor Type: 3-pole
Gear Type: Nylon Plastic
Rotation/Support: Bushing
Weight: 9.0 g
Dead Band Width: 10 uS (Microseconds)
