SPDT Relay 24V

Original price was: ₨ 200.Current price is: ₨ 180.
  • Coil Voltage: 24 Volt DC
  • Rated Coil Power: 360 mW
  • Contact Form: SPDT
  • Max Switching Voltage: 277 VAC & 125 VDC
  • Maximum Current Rating:    7 Ampere
  • Maximum DC Voltage Rating:  28 Volys
  • Service Life: 10 Million Operations
  • Pin Count :  5

SPDT Relay 6v

 30
  • Switching capacity available by 10A in spite of small size design for high density P.C. board mounting technique.
  • UL,CUL,TUV recognized.
  • Selection of plastic material for high temperature and better chemical solution performance.
  • Sealed types available.
  • Simple relay magnetic circuit to meet low cost of mass production.

SPDT Relay 9V

Original price was: ₨ 150.Current price is: ₨ 120.
  • Product Name : Power Relay;
  • Model : SRD-9VDC-SL-C;
  • Mounting Form : PCB
  • Coil Voltage : DC 12V;
  • Rated Load : 10A/250VAC 10A/125VAC,10A/30VDC 10A/28VDC;
  • Pin Number : 5
  • Contact : SPDT;
  • Size (Approx.) : 19 x 15 x 15 mm / 0.75" x 0.6" x 0.6" (L*W*H)
  • Main Color : Blue;
  • Main Material : Plastic, Metal
  • Weight : 9g;

Speaker Small 4ohm

Original price was: ₨ 650.Current price is: ₨ 500.
  • Material: Metal and Plastic, Magnet
  • Magnetic Circuit Forms: Internal Magnetic
  • Frequency Characteristics: Full Band (full range)
  • Rated Power: 3 W
  • Nominal Impedance: 4
  • High articulation, the tone is delicate and natural.

ST Link V2 STM Programmer

 250
  • Supports STM32 and STM8 microcontroller programming
  • USB interface for easy connection to PC or laptop
  • Provides in-circuit debugging and programming capability
  • Compatible with STM32 ST-Link Utility and STM32CubeIDE
  • Compact and portable design

ST256C DIP IC (Encoder Sensor Fotek WEM3T)

Original price was: ₨ 19,800.Current price is: ₨ 16,500.
  • Brand: FOTEK
  • Place of Origin: Taiwan
  • Feature: Each Signal Units (0.01m)
  • High Response Freguency: 10K HZ
  • High Speed of Revolution: 6K RPM
  • Voltage & Current Output With NPN + PNP Output
  • High Reliability With Anti-Noise Circuit

Stepper 12V 1.8A 1.8 Deg/Step

 1,150
  • High precision with 1.8° step angle per rotation
  • Rated voltage: 12V DC
  • Rated current: 1.8A per phase for strong torque output
  • Compatible with most stepper motor drivers and controllers
  • Smooth rotation and low vibration for accurate positioning
  • Durable construction for long-lasting performance

Stepper 5.16V 1.2A 1.8 Deg-Step

Original price was: ₨ 1,200.Current price is: ₨ 1,050.
  • Step Angle: 1.8°
  • Phase Current: 1A
  • Max. Temperature Rise: 80℃ (rated current, 2 phase on)
  • Operating Temperature: -20℃~+70℃

Stepper 5V 1.2A 1.8 Deg-Step

Original price was: ₨ 1,200.Current price is: ₨ 1,050.
  • Coil Type:2-Phase Hybrid
  • Supply Voltage:12-36VDC
  • Rated Current:1.2A
  • Holding Torque:314mN/m (44oz/in)
  • Detent Torque:14.7mN/m (2.1oz/in)
  • Rotor Interia:56g/cm2(0.3oz/in2)

Stepper 6.7V 1.2A 1.8 Deg/Step

 1,100
  • High precision with 1.8° step angle per rotation
  • Rated voltage: 6.7V DC for efficient low-voltage operation
  • Rated current: 1.2A per phase for steady torque output
  • Compatible with standard stepper motor drivers and controllers
  • Smooth operation with minimal vibration
  • Durable and long-lasting construction

Stepper NMB

Original price was: ₨ 450.Current price is: ₨ 350.
These motors rotate at fixed angles by digitally controlled electronic pulses and are used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. PM stepping motor uses a permanent magnet (PM) as a rotor.

STM32F0 Discovery Board

Original price was: ₨ 18,000.Current price is: ₨ 16,000.

STM32F0 Discovery in Pakistan

  • Two push-buttons (user and reset)
  • User USB with Mini-B connector
  • RF EEPROM daughterboard connector

STM8 Development Board STM8S003F3P6

 150
  • High-performance STM8S003F3P6 microcontroller with 8-bit architecture
  • Compact and durable development board design
  • Multiple GPIO pins for versatile interfacing
  • Supports programming via ST-LINK or serial bootloader
  • On-board LED indicators for easy debugging and status monitoring
  • Compatible with popular STM8 development IDEs and tools

T-Cobbler Breakout with 26 Pin GPIO Cable

 300
  • 26-pin GPIO breakout for Raspberry Pi
  • Includes 26-pin ribbon cable for convenient connections
  • Clear pin labeling for easy identification
  • Compatible with standard breadboards
  • Durable construction for repeated use
  • Compact design suitable for desktop prototyping

TCRT5000 IR Obstacle Sensor 4 Channel Module

 280
  • Four-channel IR obstacle detection module
  • High-sensitivity infrared emitters and phototransistors
  • Adjustable detection threshold for precise sensing
  • Compact and lightweight PCB design for easy integration
  • Fast response time for real-time robotics and automation
  • Low power consumption suitable for battery-operated projects