Glue Rod Small Price in Pakistan
The Glue Rod Small to using with your hot melt glue gun. Compatible with 7mm diameter sizes, this unique pack can stick and secure metals, plastics, paper and card easily. Simply insert your 7mm Glue Stick through the back of the glue gun and allow it to heat up for approximately five minutes – then just get making! The glue tends to dry quickly and permanently, making it ideal for decorations and permanent fixtures.
From papercrafts to model making – if you have a broad range of hobbies and talents, grab the essentials to make your projects a breeze!
This temperature hot glue gun contains a ball-check nozzle to prevent dripping that can cause messes when doing projects. This Glue Gun is designed for use with a variety of home and craft-related projects. You can easily on and off temperatures for heat-sensitive materials with this gun.
Characteristics
- The heater component of the oviduct is made of Positive Temperature Coefficient electric resistant (PTC), It’s heating very fast and automatic of control temperature. The hot melt glue gun can use normally in 100V to 240V power supply, be free from the electric voltage motion to limit, inside place the fuse, use more safe.
- The electricity strength was not to broke through of the product insulate while switch on electricity 3750 Vs / minute.
Application
- The toy model.
- Artificial flowers, Christmas tree.
- Decorations, the metals product.
- The wood product, card paper.
- Electronics circuit plank etc.
Operation is show
- This series product can use the diameter from 7.0mm to 7.5mm of melt glue.
- Insert the gum from the glue gun tail, sent to the gun tube, put on the power supply to preheating from 5 to 8 minutes, button up to move the trigger and can extrude the melt glue, and can control the melt glue quantity.
- While it’s working, if the melt glue is inexhaustibly in one time, then the melt glue need not take out. Put on the power supply to preheating 5 to 8 minutes when it using next time.
Caution
- The hot glue gun is a high temperature product, if the customer used the size of the meet giuethat types not agree with,, it would cause the melt flue re-flux and damaged the glue guns.
- Do not touch the nozzle area and melted glue, for they are high temperature when they working. Forbid to use in the situation that easy fuel and explode easily.
- While it’s working, do not rise it, and the nozzle can’t upward. If the glue gun does not work continuously for 15 minutes, please cut off the power supply. In order to prevent the melts glue to pour from the glue gun to damage it as all.
- The new glue gun while using for the first time may appear to emit few smoke, this is the normal phenomenon. After the glue gun is using 30 minutes, the smoke will auto cancellation.
- Should usually keep the slippery pieces of the glue gun tail sweep, for the melt glue can send into the gun tube smoothly, forbid to pull out the melt glue from the glue gun tail parts.
- The glue gun should keep dry in the airiness of place, out of the reach of children.
- This tool at of use must place at it of support up.
Temperature Glue Gun:
- Temperature glue gun
- Ball-check nozzle to prevent dripping.
- Switch on or off temperatures for heat-sensitive materials.
- Uses standard full-size glue sticks
Application Tips
- Materials being bonded must be clean, dry and free of dust, oil, and grease.
- Hot melt adhesive must be applied at the correct temperature.
- The temperature of the materials and surroundings can affect adhesion:
- Too hot and the adhesive takes too long to set
- Too cold and the adhesive sets before materials are bonded.
- The amount of adhesive applied will greatly affect the bond:
- Too little and the adhesive will cool more quickly, perhaps before the bond has been made properly
- Too much adhesive prevents the bond from cooling down before coming out of compression, allowing it to come apart.
Package Includes:
1 x DIY Hot Melt 7mm Glue Rod Small
Reviews
There are no reviews yet.