PCA9685 16 Channel Servo Motor Driver
₨ 650 Original price was: ₨ 650.₨ 500Current price is: ₨ 500.
- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
| Weight | 0.5 kg |
|---|
50 in stock
ComparePCA9685 16 Channel Servo Motor Driver Price in Pakistan
With this PCA9685 16 Channel Servo Motor Driver 12 Bit PWM Servo Motor Driver Module, you can control 16 free-running PWM outputs with just two pins. Want to make a robot or hexapod walker? Maybe you’re making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise PWM output. It’s an I2C-controlled PWM driver with a built-in clock. That means you do not need to continuously send it to signal to tie up your microcontroller, it is completely free running! Your microcontroller has a limited number of PWM outputs, and you find yourself running out! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these beauties for up to an outstanding 992 PWM outputs. Our microcontroller has a limited number of PWM outputs, and you find yourself running out! Not with the 16-Channel 12-bit PWM-Servo Driver – I2C interface. With this PWM and servo driver breakout, you can control 16 free-running PWM outputs with just two pins! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these modules for up to an outstanding 992 PWM outputs.
Features Of PCA9685 12 Bit 16 Channel PWM Servo Motor Driver I2C Module for Arduino Robot:
- Power input via terminal block or 0.1″ spaced pins
- The terminal block has reverse-polarity power input protection
- Green power LED
- Easy chaining of boards
- Power filtration capacitor installation pads
- Configurable as a push-pull or open-drain output
- Output enable pin available for outside-the-microcontroller “shut it down!” control.
- Solder pad jumpers for address selection
Specifications Of 16-Channel 12-Bit PWM-Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi:
- Color: Blue
- 5V compliant, and still talks to a 3.3V microcontroller
- 6 “address select” pins for configuring up to 62 ICs on a single I2C bus
- 3-pin connectors in groups of four for easy 16-servo installations
- PWM frequency adjustable up to approximately 1.6kHz
- 12-bit frequency resolution (equates to about 4µs resolution at 60Hz refresh rate)
- Output line projection resistors: 220Ohm
- Dimension: 62 x 25 x 13mm
Package Include:
- 1 x Servo Motor Driver PCA9685
Best Online Shopping Website For 16 Channel Servo Motor Driver PCA9685 12 Bit PWM I2C Module For Arduino at a cheap price in Lahore Islamabad Karachi Faislabad Multan Quetta Sukkur Rawalpindi Peshawar Gujranwala and all over Pakistan.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino Ethernet Shield W5100
I2C TO Serial Converter
IR Light Pi Cam (pair)
-
Infrared LED light boards designed for Raspberry Pi camera modules
-
Enables night vision capability in low-light or dark environments
-
Invisible infrared illumination that does not disturb surroundings
-
Pair configuration for balanced and wider illumination coverage
-
Compact and lightweight design for easy installation
KeyPad 4×4
L298 Motor Driver H-Bridge
-
Dual H-Bridge motor driver for controlling two DC motors simultaneously
-
Supports bidirectional motor control (forward and reverse)
-
Compatible with Arduino, Raspberry Pi, and other microcontrollers
-
Handles higher current loads than typical microcontroller pins
-
Built-in thermal shutdown protection and clamp diodes for motor safety
Laser Diode Module 650 nm
-
Red laser output at 650nm wavelength for high visibility
-
Compact module for easy integration into electronics projects
-
Stable and precise laser beam for alignment, targeting, and measurement
-
Low power consumption for efficient operation
-
Compatible with Arduino, Raspberry Pi, and other microcontrollers

Reviews
There are no reviews yet.