-38%
Raspberry pi Heatsink Kit
Original price was: ₨ 80.₨ 50Current price is: ₨ 50.
This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heat sink, it has been attached with thermal conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi.
Compatible with Raspberry Pi B.
Comes with 3 plates, of which 2 small and 1 large.
| Weight | 0.25 kg |
|---|
49 in stock
Description
Raspberry pi Heatsink Kit Price in Pakistan
Addicore set of 3 heat sinks for the Raspberry Pi models B, B , 2, 3 and 4. One large Raspberry pi Heatsink Kit for the ARM processor and two small heat sinks one for the LAN controller the other for the 3.3V regulator
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the electronics they are attached to
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
These heat sinks can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
Why do you need to put a heatsink on your Raspberry Pi
- Reduce the risk of hardware failure because of overheating
- The heatsink is a must for the overclocking
Package Includes
- 1x 14mm(L) x 14mm(W) x 5mm(H) SoC Heatsink
- 1x 9mm(L) x 9mm(W) x 4mm(H) Voltage Regulator Heatsink
- 1x 9mm(L) x 9mm(W) x 4mm(H) LAN9512 Heatsink
All heatsinks come with thermal tap attached at the bottom
Install Instructions
- Make sure the chip modules are free from dirt and grease
- Peel the protective liner on the base of the heatsink
- Affix the heatsink on the chip modules and apply firm pressure
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino UNO R3 Case Acrylic
Quick View- Transparent Clear Acrylic Case for Arduino UNO Board
- Weight: 53g
- Dimensions: 79.5 x 64.5 x 21mm
- Material: Acrylic Sheet
- With screw copper pillar and installation instructions.
- his case provides easy access to all ports
- It requires no tools for easy assembly and disassembly
- Simply Clicks Together Enclosure
- This case is a beautiful yet simple way to show off your UNO!
ESP8266-01 USB Adapter Programmer Board
Quick View- It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
- It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
- This module supports all Windows systems.
- The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
- It consists of a CH340 chip.
- It has high-speed CPU frequency.
- It can be used as a serial port WIFI.
ESP8266-01S Serial to wifi module
Quick View- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor
STM8 Development Board STM8S003F3P6
Quick View- High-performance STM8S003F3P6 microcontroller with 8-bit architecture
- Compact and durable development board design
- Multiple GPIO pins for versatile interfacing
- Supports programming via ST-LINK or serial bootloader
- On-board LED indicators for easy debugging and status monitoring
- Compatible with popular STM8 development IDEs and tools
Wemos D1 WiFi ESP8266 Development Board
Quick View
• Built-in WiFi connectivity using the ESP8266 module
• Compatible with Arduino IDE for easy programming
• Compact, breadboard-friendly design
• Supports 3.3V logic with 5V tolerant pins
• Onboard USB interface for power and programming
• Multiple digital and analog I/O pins for sensors and actuators
• Compatible with Arduino IDE for easy programming
• Compact, breadboard-friendly design
• Supports 3.3V logic with 5V tolerant pins
• Onboard USB interface for power and programming
• Multiple digital and analog I/O pins for sensors and actuators
Reviews
There are no reviews yet.