IR Range Sensor
₨ 1,200 Original price was: ₨ 1,200.₨ 950Current price is: ₨ 950.
- Distance measurement range: 20 to 150 cm
- Signal output type: voltage analog signal
- Packing size: 29.5 × 13 × 21.6 mm
- Power consumption: nominal 33 mA
- Supply voltage: 4.5 to 5.5 V
| Weight | 0.5 kg |
|---|
50 in stock
CompareIR Range Sensor in Pakistan
The IR Range Sensor GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to sonar in some applications. The distance is indicated by an analog voltage, making this sensor very easy to use.
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 20 cm to 150 cm (8″ to 60″).
The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included); the top picture on the right shows a shorter-range Sharp analog distance sensor with one of these cables. These cables have 3-pin JST connectors on one end and are available with pre-crimped male pins, pre-crimped female pins, and with unterminated wires on the other end. It is also possible to solder three wires to the sensor where the connector pins are mounted (see the lower picture to the right). When looking at the back, the three connections from left to right are power, ground, and the output signal.
Feature summary
- Operating voltage: 4.5 V to 5.5 V
- Average current consumption: 33 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
- Distance measuring range: 20 cm to 150 cm (8″ to 60″)
- Output type: analog voltage
- Output voltage differential over distance range: 2.05 V (typical)
- Update period: 38 ± 10 ms
- Size: 44.5 mm × 18.9 mm × 21.6 mm (1.75″ × 0.75″ × 0.85″)
- Weight: 5 g (0.18 oz)
Package includes:
- 1x IR Range Sensor
Best Online Shopping website for electronic Components & WIFI wireless module Transceiver Board in cheap price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta, Faisalabad, and all over Pakistan By Pakluck. For more info. Contact or WhatsApp
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Current Transformer 100A-50mA
DHT22 Module Moisture Sensor
Inductive Proximity Sensor Detection Switch PNP DC5-36V 4mm Normally Close Proximity Switch
MQ9 Module Gas Sensor
- DO switching signal (TTL) output and AO analog signal output.
- TTL output valid signal is low. (When the output low signal is on, it can be directly
- connected micro-controller or relay module.)
- Analog output voltage: the higher concentration, the higher voltage.
- Four screw holes, easy positioning.
- Long life and stability, quick response and resume.
- Input voltage: DC 5±0.2V
- Power: 150mA
- DO output: TTL digital 0 and 1 (0.1 and 5V)
- AO output: 0.1-0.3V (relatively clean), the highest concentration voltage is about 4V.
- Dimensions: 32(L) * 20(W) * 22(H) mm
- AO – analog signal output
PIR Motion Sensor
RFID Card 125kHz
Soil Moisture Sensor
- Moisture Sensor Spade
- Moisture Sensor Comparator Board (based on LM393)
- Included Jumper Wires
- LED Indicators
- Digital High/Low Output
- Analogue Variable Voltage Output
- Nickel Plated Anti-Rust Spade
- Wide Sensor Area
- M2.5 Mounting Holes
- Spade Dimensions: 65mm x 25mm
- Comparator Board Dimensions: 36mm x 21mm

Reviews
There are no reviews yet.